The original Hub Flush boat trailer accessories will save you time and money
Halt the rapid corrosion of your trailer parts
INDEPENDENTLY TESTED BY 
BRITAIN'S BEST-SELLING SCUBA MAGAZINE
BSAC advanced instructor and DIVE'S senior correspondent Charles Hood wrote:
The chances are that a fair number of divers who own RIBs will have had problems with their trailers' brakes, hubs or bearings. It's a common problem. Immersing your trailer allows salt water to enter all the places you don't want it to - namely, the wheel mechanisms. Spraying the trailer down with fresh water will help, but it is virtually impossible to get fresh water inside the hubs. The trailer is then usually towed back to its shed and left there until the next dive, when you discover the brakes have jammed because of corrosion.
Enter the Hub Flush, a new hub-washing product. The idea is simple. Attach a nozzle into the rear of each hub to which there is a tube attached. Connect all the tubes from each nozzle (two for a single-axle trailer and four for a twin-axle trailer) together into one easy-to-connect garden hose-type fitting and plug it into a water supply. We found the product worked well. We left one of the hubs exposed so we could see how the Hub Flush performed. At the end of the nozzle there is a jet, which directs the water supplied in several directions, ensuring the entire hub and brakes get a thorough soaking.
It is now more than three weeks since the kit has been installed on my trailer and we haven't had one stuck wheel.
The TEST ZONE article can be found in the September 2006 issue of DIVE magazine.
DIVE TEST VERDICT
Useful product that works.VALUE: 9/10
PERFORMANCE: 9/10
Everyone recognises the corrosive power of salt water and it's corrosion of your boat trailer parts was once inescapable.
Whenever you launch your boat trailer in the sea, the trailer parts, wheel and hubs are submerged, filling them with salt water.
Once you have pulled your boat trailer out and the hubs drain, the trailer parts inside are left in the perfect conditions for accelerated corrosion.
Left unchecked this very quickly eats away at the trailer parts and brakes causing extensive damage which will inevitably render your trailer unfit to drive and costly to repair.
As tempting as it is to ignore the problem this only allows the salt water longer to wreak its damage upon your trailer parts. Towing a trailer with damaged brakes is not only illegal and irresponsible it is also highly dangerous, but now there is a cheap and effortless alternative, our new boat trailer accessories, the Hub Flush.
The innovative boat trailer accessories, designed by someone with first hand experience of the corrosion salt water can cause, guarantees to extend the life of your boat trailer, conserve your time and save you money on maintenance and repairs.
The Hub Flush's unique system reduces the need for trailer brake services and washes away the time you spend trying to free seized trailer brake parts.
You will never need to risk falling foul of the law or worse with our boat trailer accessories and it will save you boat loads of money on replacing corroded trailer parts.
Hub Flush boat trailer accessories are so effective and trouble-free to install. Attaching the kit involves a simple DIY modification to your launching trailer.
Following this you can wash out your trailer wheel hubs with freshwater quickly and easily when you are washing the rest of your boat and trailer.
The Hub Flush allows you to attach your hosepipe to the manifold at the front of the trailer and it blasts freshwater into the wheel hubs washing out the corrosive salt water from inside saving your trailer parts.
The process is so simple and is assured to work against the favourable conditions for accelerated corrosion.
Unique and exceptional boat trailer accessories:
Beware of imitations by many of the trailer manufactures who were offered our Hubflush system to re-sell. Most have just attempted to copy it with off-the-shelf plumbing and hydraulic supplies. Kits which do not have a special nozzle like the one we have developed to spray the water around the hubs do not work effectively.
The components of our Hubflush kits has been tested to exacting standards ensuring the highest quality and durability.
Every kit sold will have undergone and passed our careful and specific quality control inspections.
After extensive research and development we have designed a unique high performance nozzle. Our nozzle jet improves the flushing effectiveness at lower water pressures.
The Hub Flush boat trailer accessories contain everything you will need to start saving you money, including simple to follow instructions for attachment and use.
We pride ourselves on our personal customer service and so, should you have any problems or questions about our boat trailer accessories please do not hesitate to contact us for help and advice.
Don't just take our word on this,
Click here to read an independent open forum discussion about Hub Flush on Ribnet...
Below are some genuine feedback letters from our customers:
"After one seasons use of my new boat and trailer, little did I know the hassle the trailer hubs and brakes would give me."
"I decided to check and adjust the brakes ready for the new season only to find that most of the parts, brake shoes, adjusters and springs were scrap."
"The trailer manufacturer was no help, the hub/brake parts are not covered for salt-water damage. Renewing the parts cost £180 and that was with me carrying out the work myself."
"I didn't want this every year and realised that the hubs needed washing out after every launch/recovery to preserve the parts. I then saw "Hub Flush".
"It was just what was needed to get the damaging salt residue from out of the brakes and hubs. The kit was easy to fit except for drilling the back plates to accept the nozzles. The remaining plumbing is easy with push on quick fittings."
"I kept this boat a further two seasons and when I serviced the brakes before I sold it there were no issues with any of the brake parts. "
"Hub Flush had saved me a fortune in cash and time. I was so pleased with the performance, the first item on my shopping list for my new boat and trailer was a 4 wheel hub flush kit."
Steve Walker Manager -
Operations & Technical ExxonMobil Marine Ltd
Twin axle trailers
We have developed our unique system for use on twin axle boat trailers too. Our unique nozzle design ensures a jet powerful enough to effectively flush four hubs as well as two when connected to a mains pressure water supply.
Order you Hubflush kit securely online by clicking the buttons below:
100% Money-Back Lifetime Guarantee
We are confident that you will be as pleased with your Hubflush as the hundreds of previous customers have been over the last ten years. Therefore, we are offering a 100% Money-Back Lifetime Guarantee. Have complete peace of mind in the quality and effectiveness of your new Hubflush kit with this special offer. If for any reason you are not wholly satisfied with the quality of your Hubflush kit you can return it at any time and receive a full refund.
© 2005 Scullion Enterprise Limited
Scullion Enterprise Limited Registered in England and Wales. Company No. 5837500 own all the original material for the content reproduced on this website. Everything is fully protected by copyright law and should not be reproduced in any way without written permission.